Portable CO2 monitor gas analyzer

Portable CO2 monitor gas analyzer

Product Information

This type of Pump-suction portable gas detection and alarm instrument is an intelligent high-performance detection instrument which can continuously monitor a variety of gases (VOC, TVOC, combustible gases and toxic and harmful gases) and has the function of personnel fall alarm. The instrument uses more than 30 kinds of plug-and-play intelligent sensors, including imported PID light ion sensor, electrochemical poison gas sensor, oxygen sensor, catalytic combustion sensor and infrared flammable gas sensor, CO2 sensor, CH4 sensor. It can detect 1-4 kinds of poisonous and harmful gases at the same time. The sensor can be flexibly configured in any combination to meet the analysis and detection needs of different industries.The wireless function of the instrument enables the security personnel to acquire the instrument data and alarm status in real time anywhere. Visual data display, 2.3 inch full-color large screen, faster response speed, strong wear-resistant shell design
will improve staff safety protection to a new level.

Details

Specification

Product model	Pump-suction portable gas detection and alarm instrument
Supporting Sensors	Electrochemical sensor, infrared sensor, PID Photoion sensor, catalytic combustion sensor arbitrary combination, flexible configuration; built-in temperature and humidity sensor, real-time display of environmental temperature and humidity
Combination mode	Two-in-one、Three in one、Four in one option(There must be a combustible gas sensor in the four-in-one system),Sensors with two-in-one or more configurations can be opened or closed independently to avoid gas interference and prolong the service life of sensors.
Sampling mode	Active pump-suction type, built-in air pump can be opened or closed independently, and the flow rate of air pump is 500 ml/min.
Indication error	≤±3% FS(Higher accuracy required according to sensor performance)
Repeatability	≤±1%
Zero drift	≤±1%（FS/Y）
Response time	≤20 S（T90），(Higher requirements depend on sensor performance）
Recovery time	≤30 S(Higher requirements depend on sensor performance）
Size	80 mm long * 200 mm high * 58 mm wide
Shell material	High Strength Wear Resistant Polycarbonate Shell + Stainless Steel
Weight	0.52kg
Battery	Large capacity rechargeable lithium battery 6000 mAh, single gas continuous working time is more than 30 hours, four-in-one gas working time is more than 24 hours, charging time is less than 7 hours, supporting mobile power supply and charging.
Charger	USB High Current 5V 2.1A Fast Charger
Alarm mode	Sound alarm 95 dB@30 cm, vibration alarm, red LED alarm lamp, personnel fall alarm; short-distance wireless and long-distance GPRS wireless alarm transmission mode(optional)
Alarm point setting	A1 alarm value and A2 alarm value; TWA alarm value, STEL alarm value and low concentration alarm value can be set separately.
Display	2.3 inch TFT colour screen
Backlight	Manual, automatic alarm
Key	7-Key navigation key
Direct reading	Measurement value, data recording status, pump working status, ambient temperature and humidity, maximum, minimum and average value
Data record	Automatic storage of data, customizable storage interval, continuous storage of 300,000 sets of data and time data, the selection of micro TF storage card,can store more than 10 million sets of data
Data transmission	Support USB measurement data download and transmission; support GPRS wireless transmission or short-distance RTU433 wireless transmission (optional)
Data printing	Supporting Bluetooth Wireless Printing for Micro Portable Data Printer (Optional)
Calibration	The target point calibration function of level 2 to 4 or above can set the calibration value and zero with one key.
Ex-mark	ExdⅡCT4 Gb（Intrinsically safe）
Protection level	IP65
Operation mode	User mode and administrator mode are optional
Working temperature	-20℃ - 50℃
Working humidity	0-95% Relative humidity (non-condensation)

Application

Company Information

FAQ

Q1. Why choose LONN?
LONN's mission: Help our clients achieve success.
LONN's prosbective: Intelligentized the industrial measurement.

Q2. Does your product can pass CE and ROHS?
Yes. Please do not worry.

Q3. Can you ship goods with battery by DHL?
Yes. We always use DHL ship battery goods.

Q4. Is OEM and ODM service avilible?
Yes. We supply fiexible experience of OEM&ODM service.

Q5. How do you ensure good product quality?
We have a complete quality control system, all products have been thoroughly tested after production.